Looking for JLU Diesel Skids? Click here.
***UPDATE: We now require the model year of JL, as Jeep has made some changes for 2021 to the motor mounting brackets welded to the frame of the JL -- and our engine/oil pan skid does tie into these brackets*
Want to make these skid plates slippery and even more impact resistant? Check out our Belly Skid UHMW kit here!
When you want to be ready for any trail any time, skid plates are important. They protect your JL's most critical components -- and you want your engine, transmission, transfer case and fuel tank in good shape while you're tackling tough terrain, technical obstacles, and of course for the ride home.
Given all of the added protection these offer over factory pieces, full belly skids become the largest piece of real estate to consider on or under your Jeep when you're looking to save weight. We chose to build these out of 5052 Aluminum for it's superior formability and strength compared to many other alloys -- as the design and shape of the skids largely determines how rigid they will stay over time. We designed these belly skids to locate bolt heads up and out of the way where possible as can be seen on the rear crossmember and fuel tank skids. The skids shown here are a pre-production unit; production units are countersunk on all the bolt holes on the bottom faces of the skids.
Weight comes in at 85 lbs for the skids, including the steel crossmember and brackets/hardware. Removal of the factory gas tank skid is required and nets you a 3/4" gain in ground clearance; in addition you also lose the weight of the factory steel gas tank skid.
We also designed these pieces with compatibility in mind for popular aftermarket suspension kits (such as the Rock Krawler Long Arm Suspension), larger axles, and multiple engine choices (such as the Hemi 6.4 seen in these photos.)
*If you completed an engine swap on your JLU, please contact us before ordering so we can get everything right! We are working on JLU EcoDiesel Skids, JT Models, and JL 2 Doors, however don't have them yet. Keep an eye out for an update on our website for those!*
Will this system work with my long arm suspension kit?
These belly skids will work with Rock Krawler, EVO, and Teraflex* Long Arm kits.
*Teraflex long arm kits do require slight modification to the fuel tank skid as this suspension kit relocates the rear lower control arms underneath the frame rail where the fuel tank skid would otherwise interfere. 5 minutes with a cutoff wheel prior to installation resolves this issue.
Can I add the UHMW Kit on later?
Yes; however you will have to remove your belly skids if they are already installed to the vehicle.