JLU On Board Air Kit


Regular price $2,799.99

Estimated 8 weeks to Ship

Next Venture's JL On Board Air Kit - As Seen on the LiteBrite YouTube channel!

If you are going to travel off-road, you're going to want to air down your tires. It lets your off-road tires do what they do best - conform to obstacles, grip terrain, and smooths out the ride. When it's time to hit the highway, it's time to air up. If you're done searching for the nearest gas station with air after a long day on the trail, this setup has you covered!

This kit mounts the included twin Viair 444c compressors and 2.5 gallon air tank underneath your 2018+ *non-e-torque equipped* 2.0 Turbo or 3.6 V6 JLU. The compressor/tank combo boasts a 3.53 CFM rating, 100% duty cycle, 200 PSI working pressure, and an IP67 waterproof rating to boot. That means fast air, enough duty cycle to air up your friends tires after you're done, ample PSI to operate air tools and re-seat tires, and no worrying about the occasional water crossing on the trail. Good for up to 40" tires.

The skid plate that encloses this system mounts to 2 of the crossmembers under your JL as well as tying directly into the driver side frame rail to ensure your on board air setup is protected on the trail. The skid is laser cut, cnc formed, and hand welded in the USA from a combination of 3/16" and 1/4" steel. An aluminum heat shield is also included to keep things safe from your Jeeps exhaust.

*JLU Specific Installation kit (wiring harness and air tank fittings) is included*
Also included, but not shown: Remote inlet/air filter bracket (to keep the air compressor inlets high), relay and air regulator mounting brackets.
Installation and appearance may differ slightly from pre-production units shown in YouTube videos and in photos. Functionality is the same.
Installation of the skid is almost entirely bolt on; 1 additional hole is drilled for installation.

Installation Guide can be previewed here

*Now includes our JL Fuel Door Air Fitting Kit!*

2018+ JL Unlimited Wrangler 4 Door Models Only. This kit is designed to work only with JLUs *not* equipped with e-torgue.

Compatability has been confirmed with Artec Belly Skids and Metalcloak Belly Skids. Rockhard 4x4 and Rusty's belly skids require removal of the exhaust portion of the skid assemblies in order to properly clear this installation.

Sage Off-Road "Air Command" bluetooth air up/down units are sold separately.

While our Next Venture Motorsports skid plate, mounting brackets, air fitting plate and all other Next Venture Motorsports components are designed, laser cut, CNC formed, hand welded, and assembled in the USA, at the heart of this kit there is a pair of Viair compressors and a Viair air tank. We do not make any claims as to the origin of materials, labor or components supplied by Viair Corporation, and thus cannot guarantee what percentage of this particular kit may be sourced globally as opposed to sourced from North America or otherwise.

Additional Details





Products are designed and fabricated to fit vehicles that have varying tolerances from the factory, minor hand fitting may be required.

Products are shipped bare metal unless otherwise specified by the customer. Bare metal products may have scratches or surface imperfections as a result of raw material handling, manufacturing, and fabrication. However, these imperfections are easily covered up with a textured powder coat finish. Additional finishing, sanding, and prep work may be required if you wish to also have them finished with a smooth powder coat or paint.

Projected lead times are estimates only, and are subject to changes due to production realities, including material and labor availability and sudden variability in order volume. Lead times are not guaranteed, but we do guarantee that we are hard at work trying to get the best product we can produce and into our customers’ hands as quickly as possible.

All Next Venture Motorsports products are laser cut, CNC formed, and hand-weld with pride in the USA. We are a Colorado-based business, and welcome visitors by appointment at our Grand Junction, CO headquarters. We hope to see you out there on the trail soon!

Jeep®, Wrangler, Rubicon, and the Jeep grille design are registered trademarks of Fiat Chrysler Automobiles (FCA). Next Venture Motorsports, has no affiliation with FCA. On the site, the terms Jeep®, Wrangler, MOPAR®, & Rubicon are used for identification purposes only.

Dana, Dana Limited, Spicer, SPL and Ultimate Dana are registered trademarks of Dana Limited. Next Venture Motorsports, has no affiliation with Dana Limited. On the site, the terms Dana, Spicer, SPL and Ultimate Dana are used for identification purposes only.

Customer Reviews

Based on 2 reviews
DANIEL weimer
Awesome setup

Easy to install and great setup if your looking for something mounted outside the vehicle.
Overall Love the setup!

Gregory D.
I love it! Pretty easy install

Price is a little high but I love it! Pretty easy install

Why choose next venture?

parts inspired by the trail

Our team got into the game after rock crawling, wrenching, fabricating and being inspired to design and build parts for what we love to do: hit the trail.

the team

what our customers are saying

My rear Next Venture diff skid takes a beating! Best rear diff skid available. Well done!

Lee Bower

Quality is amazing, items fit perfectly. Couldn't be more happy; these are gonna help out a lot between the tons and LS1.

Austin Besnier

get out there

Need help prepping your rig before you go?